Porter-cable 324mag 15 amp 7-1/4-inch circular saw with blade right

 

Best Price Porter Cable 324MAG. Free Shipping. Buy Now!.

I bought this saw with some reservation to replace my existing Porter Cable 347's. Those saws were my favorite and I could no longer find them anywhere. I was pleasantly suprised that the saws power and design did not let me down. It appeared bulky from the pictures but the actual saw gaurds and the such are not intrusive like I thought they would have been.
The basics are the same as the trusty 347. Nice substantial magnesium base, light weight, lots of power etc., but the subtle improvements (angled cut to the base, built-in sawdust deflector, rubber handle, to name a few) are very nice, making this saw a joy to use.
Enjoy.


My old Sears circular saw had a base too small to fit on my new EZ Fence saw guide, so I started looking for another one that had an integrated saw dust collection system, blade brake, and laser guide. I only found three saws on the market, Sears, Festool, and Porter Cable even had a dust collection system The Sears version had a laser included, but I figured unnecessary with the guide. It also looked a little "cheap". The Festool was nice, but too expensive. Based on internet recommendations I decided on the Porter Cable 324MAG 7 1/4 inch 15 AMP circular saw.

The saw is nice and light, cutting through 3/4" plywood effortlessly with a new blade. The tool free blade change makes blade changes a snap, but requires a little practice. However, eventually you will have to get a conventional blade bolt from Porter because the blade will loosen up. Porter provides this free under warranty.

The saw dust collection nozzle, interestingly, is on the front of the saw. I suppose this helps capture more dust as the blade is forcing the saw dust up the nozzle as it rotates. The position does take some getting used to, as you have to curve the dust hose around the saw to keep it clear of the cut. You can leave the hose leading out ahead of the saw, but you have to stay more alert to it's position. The dust collector does seem to catch most of the dust, as I had less than one dust pan full after cutting up two full sheets of 3/4" plywood.

I am very pleased with this saw. It works quite well with my saw guide and makes nice cuts in heavy material effortlessly. EZ Guide now has a saw base specifically for this saw.




I had been looking to replace my old sidewinder, and found this remanufactured saw to be an unbeatable value. I love the saw and only wish it came stock with a rip guide.


I found the Porter-Cable 324MAG Circular Saw to be a great work horse. Plenty of power and light wait for use all day. The quick release feature for the 7-1/4-inch blade makes life easy. The guide and plate are very accurate. I've used many different brands of circular saws but I find this one to be a gem.


I have used porter cable saws for thirty years and this saw has been good until I dropped it and cracked the saw guard at the narrow, unreinforced point by the nozzle. It's junk now. I'm amazed that the engineers couldn't have realized this would happen. The saw is practically broken in half and won't cut a straight line for the life of it.


I bought this saw to use in cutting plywood sheets and finishing work since my table saw is not very big. This saw is both light and powerful, and has been a workhorse for me. The tool-free adjustment levers are outstanding and easy to set. Likewise the tool-free arbor for quickly changing blades without a wrench.

The Porter Cable "Razor" combination blade is great for framing and such, but I didn't care for the splintering in plywood. So, I bought a Freud TKR303 which is a fantastic blade for finish work.

Overall, the 324 Mag is fantastic and I doubt I'll ever need to buy another circular saw. Heartily recommended.


This was the first PC tool that I bought. It is very well designed and I am most pleased with it. The grips are comfortable and stable and the magnesium frame makes it quite handy. I've used it to cut a variety of materials including hard woods, plywood, and softwood, with the occasional unexpected concealed nail thrown in. It just chews through everything as fast as I can push it. The controls are nice and the adjuster for depth is very good, I can really control exactly how deep a cut I get. The case it comes with is a nice bonus and even has a slot to keep the manuals. The quality of this tool has made me a PC fan and I now own 6 different PC power and air tools.


I've had this saw for several years, and use it for framing, cutting plywood (and other sheetgoods) construction and destruction.

With a fine tooth blade and a cutting jig, I can cut down sheetgoods too large to easily handle on my table saw. The cuts are straight enough for furniture. With a framing blade, it'll cut 2x4's and plywood as fast as I can push the saw. With a junk blade, I'll go on a roof and cut through ply, tar paper, asphalt shingles and nails.

The dust chute blows the dust anywhere you want (well, most of it) or collects it in a bag.

It's light, powerful and durable. It's a great tool.


I love this saw! I looked at the Bosch, Milkwaukee, Dewalt & Makita and settled on this one. It has the best balance of features, power and weight. You can discharge the dust or attach your shop vac to collect it. It's not perfect but it collects 80% of the sawdust, which is great if you have to use it indoors. I also like the tooless blade change and the heavy duty sole plate. A great tool with lots of power {whoa whoa}. I wish the carrying case had storage for a few spare blades but that's my only complaint.

Toolman Joe


I purchased a porter+cable 324mag after having used a skil 5700 for about a month and met with numerous problems (frozen depth adjustment level, wobbling base plate, etc).
The saw is much more solid and stable, it performs flawlessly and is well worth the $129 price I have paid.

Images ScreenShot

About Porter-Cable 324MAG 15 Amp 7-1/4-Inch Circular Saw with Blade Right detail

• Amazon Sales Rank: #20017 in Home Improvement
• Brand: Porter-Cable
• Model: 324MAG
• Number of items: 1
• Dimensions: 20.50 pounds

Features

• Durable, lightweight magnesium construction; weighs only 9.6 pounds
• Powerful 15 Amp, 5,800 RPM motor
• Quik-Change keyless blade change for effortless, tool-less blade changes
• 7-1/4-inch circular saw with carbide-tipped blade for flawless cuts
• Precise zero-50 degree miter capacity; accurate positive stop at 45 degrees

Read more Porter-Cable 324MAG 15 Amp 7-1/4-Inch Circular Saw with Blade Right

Related Product

Source From Best Price Porter Cable 324MAG For Sale Best Buy Porter Cable 324MAG Low Price Buy Cheap amp Review
Bye Bye
Cheers and Care

 

Porter-cable 7518 speedmatic 15 amp 3-1/4 hp fixed base 5-speed router

 

Best Price Porter Cable 7518. Free Shipping. Buy Now!.

I am please with the perfomance of this machine o far. The only problem is
being mounted in a router table you have to keep blowind the sawdust out of the machine very ofting.


I have 35 routers. I owned and regulary used 7 Porter Cable routers, including 3ea. 7518s. All of the Porter Cable routers created a chattered result. The collet run-out vibration sometimes caused bits to loosen in the collet while routing. The motor arbors were fine, but all 7ea. 1/2" collets averaged .007" run-out at the top of a 1 1/2 double flutted bit. The bit was turned 180 dgrees and the collets retested at 180 dregrees, but the run-out remained the same. The worst had .015" run-out, so it was thown out. It's a shame the collets were so short and gripped bits so poorly. I'll be replacing them all.


Porter-Cable 7518 Speedmatic 15 Amp 3-1/4 Horsepower Fixed Base 5-Speed Router
VERY GOOD MACHINE I WOULD RECOMED TO ANYONE


A very good, powerful router. Good for big bits and heavy cuts. We use this router motor in conjunction with the Bench Dog lift and table to make a "mini shaper" for some special machining. Have bought and installed 5 of these routers. I just use the motor in the lift. I have not used the router on a base free hand. It is heavy. I would reccomend this model more use in a router lift or for a heavy duty operation like sink cutouts or pattern cutting. I think you buy this one for its power. The soft start takes a little getting used to. With the router lift and table you really need the switch Bench Dog makes to mount on their router tables. No way to see the switch on this router when it is upside down in a lift. Bench Dog sells a switch for their router tables that I will try.


When it comes to woodworking, Porter-Cable is my choice of tool. This router is another fine example.


I recently purchased this router on Amazon; it's my second PC 7518. I have two router tables in my shop and this one will live in the second table. I've had the other one mounted for over 4 years now and it's hasn't missed a beat! This router is a "locomotive" with power to burn. It was built by Porter Cable for a production environment; I'm a hobbyist and expect them to run forever. For a router table application, it's hard to beat, IMHO.




This router works beautifully and fits my Jointech Smart Digital router system. Has plenty of power for cabinet doors, jewelry boxes. Superior product.


This is a fine router and I would give it 5 stars except for the fact that the speed control switch is a little flimsy. The fit and finish are not up to the old PC standards. I have several older PC tools (a router and two drills), some of which I bought in the late 70's, they were well built and after changing motor brushes and the on/off switchs they work as well as the day I bought them. The construction of this router is not as robust.
I bought this router to use only in a router table, I have a 3 HP Makita plunge router that I like, but didn't need the plunge feature in the router table. Thus far, the PC 7518 has cut like a dream using both large and small bits. I like the "easy out" collet, it is well designed, works as promised and is a great improvement over the old collets.


The slow start is a safety feature. Any maladjustment can be detected before the thing gets going too fast. Like any other fine tool, you have to keep it clean, so the blades are set properly. The height adjustment is stable and easy. I replaced the router base with a 10" by 10" see-through 3/4-inch plastic base for more stability, especially for during slot cutting, where any change of plane mis-places the slot and hence the spline, hence the alignment of the boards. The machine is powerful and smooth. I bought it because my friend -- something of a genius in cabinet-making and in almost all other areas -- swore by it. He was right.


I bought this router thinking that it would have no problem cutting raised panels based on PC description of the product. When I received the router I tried cutting raised panels in red oak with a 3 1/2" panel cutter, the router stalled and had to be reset. I thought something was wrong with it so I called PC and they sent me a new one. It did the same thing. You'll have to take at least 4 passes and even then chance burning the wood if you use this router. It worked great on all other bits except the large panel raiser, which is why I bought it. I could've spent a whole lot less for a router to use with my smaller bits. When I contacted PC about the problem they informed me that that was the design of the router circuitry to stall if too much load was applied. Having to take 4 passes in red oak is a bit excessive. I've had the router for 2 years and ready to throw it in the drawer and not use it.

Images ScreenShot

About Porter-Cable 7518 Speedmatic 15 Amp 3-1/4 HP Fixed Base 5-Speed Router detail

• Amazon Sales Rank: #3553 in Home Improvement
• Brand: Porter-Cable
• Model: 7518
• Number of items: 1
• Dimensions: 9.50" h x 11.25" w x 13.50" l, 14.50 pounds

Features

• Gets the toughest routing jobs done with a powerful 3-1/4 HP motor with five-speeds between 10,000 and 21,000 RPM
• Soft-starting feature reduces torque at start-up
• Aluminum motor housing and sealed ball bearing construction increase durability
• Measures 11 x 7 x 11 inches (LxWxH) and weighs 14-1/2 pounds
• Includes fixed base, 1/2-inch collet, collet wrenches, and operating manual

Read more Porter-Cable 7518 Speedmatic 15 Amp 3-1/4 HP Fixed Base 5-Speed Router

Related Product

Source From Best Price Porter Cable 7518 Router For Sale Best Buy Porter Cable 7518 Router Low Price Buy Cheap amp Review
�Have a great day everybody!
Cheers